01
Control
Our valves open and close the flow of ammonia automatically, so the plant keeps the right temperature on its own.
Industrial refrigeration controls · Made in India since 1978
Keeping the cold chain safe, since 1978.
We make the valves, controls and safety systems that keep ammonia refrigeration plants running. Think of the cold rooms behind your milk, your medicine and your ice cream. Our parts make sure the cold never stops, and nobody gets hurt.
- 89 products for ammonia, CO2 and other refrigerants, all from one maker
- Certified for Europe to PED 2014/68/EU, and approved by India's dairy board
- Trusted for decades by Johnson Controls, Kirloskar, Mycom and more
- years of making refrigeration controls in Pune
- 48
- years of making refrigeration controls in Pune
- products across 11 categories, from one maker
- 89
- products across 11 categories, from one maker
- maximum working pressure of our stainless steel valve series
- 150 bar
- maximum working pressure of our stainless steel valve series
- watched live by our IoT data logger, from anywhere
- 16 inputs
- watched live by our IoT data logger, from anywhere
Standardised for decades by
Johnson ControlsYorkKirloskar PneumaticsAlfa LavalFrickSabroeMycomIDMCVoltasCooling PeopleACR EngineeringSystems & Components
New to refrigeration? Start here
Big cold rooms run on ammonia. Ammonia needs careful hands.
Dairies, breweries, drug makers and cold stores use ammonia to make cold, because it is efficient and kind to the climate. But ammonia is under high pressure, and it is dangerous if it leaks. Every pipe needs a valve that opens and closes at the right moment. Every tank needs a control that keeps the level right. Every plant needs alarms that speak up before a small problem becomes a big one. That is our work.
02
Protect
Our safety valves, leak detectors and alarms protect your people, your stock and your building.
03
Save
Our purgers and dehydrators clean air and water out of the system, so compressors work less and power bills drop.
04
Watch
Our data loggers send temperatures and pressures to your phone, so you can see your plant from anywhere.
Product categories
Everything your refrigeration plant needs to run safely
From valves that control the flow of ammonia to sensors that watch your plant from your phone. One manufacturer. One standard of quality.
Electric valves that open or close refrigerant flow automatically, on a signal.
Ammonia solenoid valves for liquid, suction and hot gas lines.
View products →Heavy-duty, gas-powered valves for big plants and very cold lines.
Gas-powered solenoid valves and suction stop valves for defrost duty.
View products →Keep the right amount of liquid ammonia in every vessel, all day.
Liquid level controllers for separators, receivers and surge drums.
View products →Hold pressure and temperature steady, even when the load changes.
Pressure and temperature regulating valves for steady process cooling.
View products →Stop valves, non-return valves and other parts for every section of the pipeline.
Includes high-pressure valves up to 55 bar for CO2-ammonia cascade plants.
View products →Relief valves, leak detection and alarms that protect people and plant.
Dual safety valves, centralised ammonia leak detection, the Emergency Pressure Control System and the Man Trap Alarm System.
View products →Match compressor power to the cooling you actually need, and protect the compressor.
Capacity controllers for screw and piston compressors.
View products →Clear ice from cooling coils with hot gas, without stopping the plant.
Hot gas defrost systems for gravity and pump recirculation plants.
View products →Purgers, water removal and heat recovery that cut your power use.
Automatic air purgers, the WDO water removal system, air-to-air heat recovery, desuperheaters for free hot water and an adiabatic condenser energy saver.
View products →Sensors, transmitters, displays and data loggers that watch your plant.
Temperature, pressure, humidity, CO2 and ethylene sensors, data loggers, web-based monitoring and centralised plant control.
View products →Coils for our solenoid valves, made to the same standard.
Replacement coils, so spares come from the same maker as the valve.
View products →
Industries served
Built for the plants that keep food, drinks and medicine cold
Not sure which products suit your plant? Pick your industry. Each one has its own pressures, and we have been solving them for decades.
Dairy
From milk chilling to the cold store, approved by India's National Dairy Development Board.
Milk spoils fast if chilling slips. Steady levels and clean defrost keep every batch safe.
Beverage & Breweries
Steady temperatures for brewing, fermentation and bottled storage.
A brew that runs warm loses its taste. Precise valves hold each tank on target.
Pharmaceutical
Precise, monitored cooling for medicines that must never get warm.
Medicines lose strength when they get warm. Monitoring proves the cold held, every hour.
Bulk Drugs, Dyes & Intermediates
Safe, stable process cooling for chemical reactions.
Many reactions give off heat. Reliable cooling keeps them under control.
Chemical
Dependable controls for heavy process refrigeration.
Process plants run day and night. Parts must work for years without fuss.
Food Processing
Cold chain control from the processing line to the freezer.
Frozen food must stay frozen from line to truck. Defrost and level control make that easy.
Cold Storage
Keep every pallet at the right temperature, every single day.
One warm night can cost a full store of stock. Alarms and live data warn you early.
Ice Cream
Deep-freeze control, watched live from your phone.
Ice cream that thaws and refreezes is ruined. Deep-freeze control keeps it perfect.
Staple Fibre, Nylon & Textile
Process cooling for fibre and textile production.
Fibre quality depends on steady temperatures. Our controls keep the process even.
Talk to an engineer about your plant.
Contact an engineerWhy Manik Engineers
Why plants choose Manik Engineers
Trust in this industry is earned slowly. Here is how we have earned it.
In 1978, most refrigeration controls used in India were imported. They were costly, and spares took months to arrive. Mr. Shekhar Kulkarni, an IIT Bombay alumnus, started Manik Engineers in Pune to change that. Almost five decades later, the same idea drives us: build controls good enough for the world's biggest plant builders, make them here, and stand behind every one.
1978
48 years of one craft
Founded in Pune by Mr. Shekhar Kulkarni, an IIT Bombay alumnus. His goal was simple: make world-class refrigeration controls in India, at an honest price, so Indian plants did not have to import them.
CE / PED
Certified for Europe
Our pressure equipment is certified to the European Pressure Equipment Directive 2014/68/EU. We are the only Indian refrigeration controls company with this certification.
OEMs
Chosen by the builders
The companies that build refrigeration plants, including Johnson Controls, York, Kirloskar Pneumatics, Alfa Laval, Frick, Sabroe and Mycom, have standardised our controls for decades.
89
One maker, the full range
Valves, level controls, safety systems, energy savers and IoT monitoring. 89 products in 11 categories means one supplier, one quality standard and one phone number.
4 checks
Before anything ships
Raw material is inspected by hand before production. Finished products are is tested for design, performance, dimensions and corrosion resistance before it leaves our factory.
Global
Ready to export
We supply plants across the Middle East, Asia Pacific, Africa and Australia, with dealers in the Philippines and Russia.
How every product is checked
Step 1
Material check
Raw material is inspected by hand before any work begins.
Step 2
Design check
Each finished product is checked against its design, so it works as drawn.
Step 3
Performance test
Valves and controls are tested in our own testing facility before they leave.
Step 4
Size and corrosion check
Dimensions are measured, and resistance to corrosion is checked.
Your plant, with and without the right controls
| The problem | Without | With Manik |
|---|---|---|
| Air trapped in the system | Compressors push harder and power bills climb. | An automatic air purger removes it, day and night. |
| Water and oil in the ammonia | Parts wear out and cooling gets weaker. | The WDO separates them out, using heat the plant already has. |
| Ice on the cooling coils | Rooms warm up and coils work badly. | Hot gas defrost clears the ice without stopping the plant. |
| An ammonia leak | People are at risk and you may not know until too late. | Leak detection and alarms speak up at once. |
| Nobody at the plant at night | You find out about a problem in the morning. | The data logger shows live readings on your phone, anywhere. |
| Salty, humid or outdoor air | Ordinary valves rust and start to leak. | Stainless steel valves are built for it, up to 150 bar. |
Featured products
Popular products
Our most requested valves, purgers and monitoring systems. Each one solves a problem plant engineers face every day.
01 — IoT Data Logger
Watch your plant from anywhere
Records freezer and cold room temperatures, plus compressor suction, discharge, oil and intermediate pressures. All live, on your phone, tablet or computer.
Why it matters: you see a problem on your phone before your stock is lost.
- 16 inputs (upgraded from 8)
- Temperature and pressure
- Running in plants for 10+ years
02 — MS9B
Gas-powered solenoid valve
A strong, heavy-duty valve that opens and closes refrigerant flow on an electric signal. Because gas pressure does the work, it stays reliable in deep cold and thick oil.
Why it matters: defrost works properly, so coils stay clear and the room stays cold.
- Ammonia, R22, R134a, CO2
- Suction and defrost lines
- Works at low temperatures
03 — MCK2
Gas-powered suction stop valve
Closes suction lines firmly during defrost. Its spool-type piston resists dirt better than common designs, and the ductile iron body is tougher than grey iron.
Why it matters: dirt in old plants jams weaker valves. This one keeps closing tight.
- Ductile iron body
- Manual opening stem for servicing
- Pilot line strainers included
04 — MHPSV-SS
High-pressure stainless stop valve
Shuts off sections of high-pressure lines. Stainless steel stands up to humid, salty, coastal and outdoor air. The seal can be replaced while the valve is still working.
Why it matters: coastal and outdoor plants stop losing valves to rust.
- Up to 80 bar g (1160 psi g)
- -60°C to +150°C
- CF8 cast stainless body, PTFE seat
05 — MSGP-2E
Automatic air purger
Air trapped in a refrigeration plant makes compressors work harder. This unit finds it and removes it, automatically, so your condensing temperature stays where it should.
Why it matters: less air means lower power bills and less wear on compressors.
- Fully factory assembled
- Installs at ground level
- Can serve many purge points
06 — WDO
Ammonia purifier / dehydrator
Water and oil in ammonia slowly damage a plant. The WDO separates them out continuously, using heat the plant already has, so it costs almost nothing to run.
Why it matters: a clean system runs cooler, uses less power and lasts longer.
- Energy-neutral operation
- Self-regulating, low maintenance
- Short payback time
Certifications & standards
Certified to the standards your plant demands
A certificate is a promise someone else has checked. Here are ours, in plain words.
✓
ISO
Our manufacturing follows a checked, documented quality system. Every step is written down and checked.
✓
CE / PED 2014/68/EU
European approval for equipment that works under pressure. Our valves can go into plants built to European rules.
✓
Full Quality Assurance for Pressure Equipment
Our whole quality system is approved for pressure equipment, not just one product.
✓
EAC
Approved for supply to Eurasian Customs Union countries, including Russia, where we have a dealer.
✓
NDDB approved
Approved by India's National Dairy Development Board, for the plants that keep the nation's milk cold.
✓
Make in India
Designed and made in India, since 1978.
Ask for a certificate
Certificates are available to download on request.
Export & global presence
From Pune to plants around the world
Our valves and controls work in plants far from home. We ship to the Middle East, Asia Pacific, Africa and Australia, and we meet buyers at industry exhibitions around the world.
- Middle East
- Asia Pacific
- Africa
- Australia
- India
Dealer
Philippines
Las Piñas, Metro Manila
Dealer
Russia
Omsk
Meet us next
All India Cold Chain Seminar & Expo
13 to 15 May 2027 · Mumbai
Come and see our valves, controls and monitoring up close, and bring your plant questions.
Clients
Trusted by the names you already know
Refrigeration builders and partners
Johnson ControlsKirloskar PneumaticsFrick IndiaMycomYork IndiaAlfa LavalSabroeVoltasIDMCBlue StarKirloskar McQuayBatliboi
Plants that use our products
PepsiCoCoca-Cola IndiaNestleCadburyUnited BreweriesHindustan LeverCiplaNovartisLupinRanbaxyAjanta PharmaMysore Breweries
We are using your liquid level controllers, solenoid valves, non-return valves, dual safety valves, automatic air purgers, ammonia leak detection systems and compressor capacity controllers. We recommend these products for safe, efficient refrigeration plant operation.
Hiroyuki Egashira
Managing Director, Mycom India Ltd.
The performance of these valves is found to be excellent for the past several years.
Dr Ashish D Kadam
Senior Manager, Industrial Refrigeration Engineering, Johnson Controls India
Known for reliable, trusted product quality, excellent delivery and dependable after-sales service. The sharing of technical know-how with end users is unparalleled in the industry.
Shyamkumar
Chief Manager Engineering, Baby Marine
Installations
Real plants. Real results.
Three stories from the field, told the simple way: the problem, what we did, and what changed.
An ice cream plant owner who can now travel
- The problem
- The owner needed to know the freezers were safe, even while away or managing other sites.
- What we did
- We installed our own IoT data logger to watch freezer and cold room temperatures online.
- What changed
- It has run for more than 10 years. It was then upgraded from 8 to 16 inputs, adding compressor pressures, without significant extra cost.
A full plant of Manik controls at Johnson Controls India
- The problem
- A global plant builder needed dependable controls across many installations in India.
- What we did
- Level controllers, solenoid valves, dual safety valves, air purgers, leak detection, temperature monitoring and compressor capacity controllers, all from one maker.
- What changed
- In their words: "The performance of these valves is found to be excellent for past several years."
Approved vendor for Baby Marine
- The problem
- Marine and seafood plants need parts that survive humid, salty air and still deliver on time.
- What we did
- Manik became an approved vendor, supplying controls and sharing practical know-how with the plant teams.
- What changed
- Their engineering head calls our quality reliable, our delivery excellent and our after-sales service dependable.
Technical resources
Everything your engineers need, in one place
Specifications, guides and software. Free to download.
Product Catalog
Our full range in one PDF. Also available in Vietnamese.
Download catalogDatasheets
Detailed specifications for each product.
Browse datasheetsArticles
Practical guides on plant safety, air purging and more, from Cold Chain magazine.
Read articlesVideos
See our products at work and meet our team.
Watch videosMobile App
Monitor your plant from your phone with our data logger software.
See the softwarePC Datalogger Software
Log and review plant data on a Windows PC.
Download softwareRequest a quote
Tell us what your plant needs
Share a few details. An engineer, not a call centre, will read it and reply.
What happens next
- 1
You tell us about your plant
Send the form, call or WhatsApp. Rough details are fine.
- 2
An engineer picks the right parts
We match models, sizes and refrigerant to your plant, and explain why.
- 3
You get a clear quote
Every part is made and tested in our Pune factory before it ships.
Questions we hear every week
Do you make valves for CO2 plants?+
Yes. Our high-pressure valves work up to 55 bar, made for CO2-ammonia cascade systems. Our stainless steel series goes up to 150 bar.
Can you help make my plant safer?+
Yes. We make dual safety valves, centralised ammonia leak detection, an Emergency Pressure Control System and a Man Trap Alarm System that helps nobody get stuck inside a cold room.
Is there an app to watch my plant?+
Yes. The Manik Engineers Datalogger app is on the iPhone App Store, and we also offer PC software to log and review plant data on a Windows computer.
Which refrigerants do your valves work with?+
Most of our range is built for ammonia. Many valves, like the MS9B solenoid valve, also work with R22, R134a and CO2. Tell us your refrigerant and we will confirm the right model.
My plant is near the sea. Will the valves rust?+
We make a stainless steel series for exactly this. It is built for humid, salty and outdoor air, and handles working pressures up to 150 bar.
Can I check my plant when I am not there?+
Yes. Our IoT data logger sends temperatures and pressures online, live. You can see them on a phone, tablet or computer from anywhere in the world.
Are your products approved for Europe?+
Yes. Our pressure equipment is CE marked under the Pressure Equipment Directive 2014/68/EU, and our quality system holds Full Quality Assurance approval for pressure equipment.
Do you supply plant builders as well as plant owners?+
Both. Leading builders like Johnson Controls, Kirloskar and Mycom have used our controls for decades, and plant owners buy from us directly for spares and upgrades.
How do I get a price?+
Send the form above, call us, or message us on WhatsApp. Include the product, size and quantity if you know them. If you do not, just describe your plant and an engineer will help.